Token Ioctls

Token fds support the following ioctls. Each fd carries a per-handle access mask that gates which ioctls the holder can call.

§13.2.1 KACS_IOC_QUERY #

Queries token information. Takes a query class and output buffer. Uses the two-call pattern: call with buf_len=0 to get the needed size, then call again.

Requires TOKEN_QUERY (0x0008).

§13.2.2 KACS_IOC_IMPERSONATE #

Impersonates this token on the calling thread. The token MUST be an impersonation token. Follows the two-gate model with the calling thread's primary token (real_cred) as the "server" and the fd's token as the "client":

• Gate 1 (identity): server user SID == client user SID with same restriction status, OR server holds SeImpersonatePrivilege. Restriction mismatch (restricted server → unrestricted client) is hard-denied (-EPERM). Other identity gate failures cap to Identification level.
• Gate 2 (integrity ceiling): effective level is capped if client integrity > server integrity.

The effective impersonation level is the minimum of: the token's own impersonation_level and the level permitted by the gates.

Requires TOKEN_IMPERSONATE (0x0004).

§13.2.3 KACS_IOC_INSTALL #

Commits this token as the calling process's primary token. The token MUST be a primary token.

The install is process-wide, not thread-local: the kernel replaces the primary token for the entire calling thread group.

• Threads that are not impersonating switch immediately to the new primary token as both real_cred and cred.
• Threads that are currently impersonating keep their active impersonation in cred; only real_cred changes underneath them. A later kacs_revert() lands on the new primary token, not the old one.
• The calling thread performs its install immediately. Sibling threads in the same thread group converge in their own context via queued in-kernel credential work. A brief transition window where some sibling threads still observe the old primary token is permitted. No completion barrier is exposed to the caller.

When the new token's user SID differs from the current primary token's, the process SD is automatically regenerated using the default template with the new token's user SID as owner. If the user SID does not change, the existing process SD is preserved.

Requires TOKEN_ASSIGN_PRIMARY (0x0001) on the handle and SeAssignPrimaryTokenPrivilege on the caller's real token.

§13.2.4 KACS_IOC_DUPLICATE #

Deep-clones the token into a new token fd. Takes: target token type, target impersonation level, and desired access mask for the new handle. Impersonation level escalation is forbidden only when the source token is already an impersonation token (new level MUST be <= source level in that case). A primary token duplicated to Impersonation MAY use any caller-selected impersonation level. When duplicating to Primary, impersonation_level is set to Anonymous. The duplicate's elevation_type is reset to Default. The modified_id is initialized to the new token_id.

The desired access mask for the new handle is checked against the new token's SD (which is a freshly generated default SD). The caller's effective token is the subject for this AccessCheck.

Requires TOKEN_DUPLICATE (0x0002) on the source handle.

§13.2.5 KACS_IOC_ADJUST_PRIVS #

Enables, disables, removes, or resets privileges atomically. Takes an array of (privilege, action) pairs. Removal is irreversible.

Special sentinel: if the first and only entry is { luid = 0, attributes = KACS_PRIV_RESET_ALL_DEFAULTS }, privileges_enabled is reset to privileges_enabled_by_default. Reset-to-defaults does NOT restore removed privileges: privileges absent from privileges_present remain absent. Any other use of KACS_PRIV_RESET_ALL_DEFAULTS is invalid. Unknown attributes bits are invalid. Duplicate privilege indices in the same request are invalid. All entries are validated before any are applied. Enabling a privilege that is absent from privileges_present is invalid; disabling or removing an already absent privilege is a no-op.

Bumps modified_id.

Requires TOKEN_ADJUST_PRIVILEGES (0x0020).

§13.2.6 KACS_IOC_ADJUST_GROUPS #

Enables or disables group entries atomically. Takes an array of (group index, enable/disable) pairs. Group indices are zero-based into the token's groups array. count = 0 is invalid. All entries are validated before any are applied — if any entry targets a mandatory, deny-only, or logon SID group, or if any group index appears more than once in the same request, the entire operation fails with no changes.

Special sentinel: if the first entry has index = 0xFFFFFFFF and enable = 0, all groups are reset to their creation-time enabled/disabled state. The sentinel MUST be the only entry (count = 1). Any other use of index = 0xFFFFFFFF is invalid.

Reset does NOT undo deny-only status set by FilterToken — SE_GROUP_USE_FOR_DENY_ONLY groups remain deny-only. Bumps modified_id.

Requires TOKEN_ADJUST_GROUPS (0x0040).

§13.2.7 KACS_IOC_ADJUST_SESSIONID #

Changes the token's interactive session ID. Takes a u32 session ID value.

Requires TOKEN_ADJUST_SESSIONID (0x0100) on the handle and SeTcbPrivilege on the caller's real token. Bumps modified_id.

§13.2.8 KACS_IOC_ADJUST_DEFAULT #

Adjusts the token's default owner, primary group, and/or default DACL. Takes a struct with: dacl_ptr (userspace pointer to new default DACL, 0 = no change), dacl_len (length, 0 with non-null ptr = clear DACL), owner_index (new owner_sid_index, 0xFFFF = no change), group_index (new primary_group_index, 0xFFFF = no change). Each field is independently optional. Bumps modified_id.

Requires TOKEN_ADJUST_DEFAULT (0x0080).

§13.2.9 KACS_IOC_RESTRICT #

Creates a restricted token. Takes: SIDs to mark deny-only, privileges to remove, restricting SIDs to add, and a write_restricted flag. The variable payload at data_ptr is u32[num_deny_indices] immediately followed by num_restrict_sids packed binary SIDs. Deny indices are zero-based into the token's group array. Duplicate deny indices are invalid. data_len MUST match this layout exactly: truncated, malformed, or trailing payload bytes are invalid. All inputs are validated before any token is created; if any index or SID entry is invalid, the operation fails with no result token. When write_restricted is set, the restricted SID check applies only to write operations and user_deny_only is set to true. Returns a new token fd with the same per-handle access mask as the source token fd used for this ioctl. The restricted token's elevation_type is reset to Default.

Requires TOKEN_DUPLICATE (0x0002).

§13.2.10 KACS_IOC_LINK_TOKENS #

Associates an elevated/filtered token pair on a logon session. Takes a struct with two token fds: elevated_fd (first) and filtered_fd (second), plus a session_id. Both tokens MUST belong to the specified logon session, MUST be primary tokens, and MUST carry the same user SID. The pair is registered at the session level. Upon successful linking, the elevated token's elevation_type is set to Full and the filtered token's elevation_type is set to Limited. This is the only mechanism that sets elevation_type to a non-Default value.

Requires SeTcbPrivilege. Both token fds require TOKEN_DUPLICATE access. "Belongs to" means the token's auth_id equals the specified session_id (LUID comparison). The session_id parameter is a u64 LUID. Linking tokens that are already part of a pair replaces the existing pair on that session. Linking a token to itself returns -EINVAL. If a token already has elevation_type = Full, it MAY be relinked only in the elevated_fd role. If a token already has elevation_type = Limited, it MAY be relinked only in the filtered_fd role. Role changes fail with -EINVAL.

§13.2.11 KACS_IOC_GET_LINKED_TOKEN #

Retrieves the partner token from a linked pair. Behavior depends on privilege:

• Without SeTcbPrivilege: returns a deep clone at Identification impersonation level with TOKEN_QUERY access only. The clone follows DuplicateToken semantics for independent object creation (new token object, new token_id, modified_id initialized to the new token_id, fresh default token SD), except that it preserves the partner token's elevation_type. The caller can inspect the partner's identity but MUST NOT impersonate it or use it for access decisions.
• With SeTcbPrivilege: returns a full primary token handle to the actual linked token. The caller receives full usability — this is required for system daemons (authd) that manage linked pairs.

Requires TOKEN_QUERY (0x0008). If the token is not part of a linked pair (elevation_type is Default, or the pair was destroyed by session termination), returns -ENOENT.